Enbi rollers increase service life by up to 300%
Enbi redesigned banknote feeding rollers to resist wear in high-speed systems—tripling service life, cutting maintenance, and improving customer satisfaction.
The Project
Our customer uses the same / similar system for the feeding and separation of the bank notes in a high speed cash counting system. The rollers began to show increased signs of wear with a result that the customer’s maintenance people had to replace these units too often causing their customers to be unhappy.
The History
This feeding and separation system is based on a fixed nip. The average thickness of a bank note is 0.1 mm and therefore small abrasion losses on diameter result in a malfunction of the cash counter. However, the customer did not wish to re-design the total system due the high cost to test and to validate the component parts.
Our Approach
Our starting point was the current system configuration. We used our knowledge of the material being used and the possible tolerances that we use to control the movement of the Enbi rollers. Enbi’s engineering team worked closely with the design and service teams of the customer to develop a range of different materials with optimized tolerance components, resulting in a very similar system that can be used in several machines. Extensive testing by both parties proved that the new materials gave:
- Greater abrasion performance
- Lower maintenance needs
- Extended service intervals
Benefits
As the lifetime of this new feeding and separation system was extended substantially (up to triple the original lifetime), the customer had a huge saving in their maintenance department. The end customer was much more satisfied because the time in between maintenance got a lot longer.
Find out more about our ATM and Cash Handling market solutions.
More from our portfolio
Development of a label B tank insulation for hot water tanks with a leading heating and cooling system manufacturer
Enbi developed an energy-efficient, hygienic, and easy-to-install insulation system that helped a leading manufacturer meet Label B standards—cutting heat loss and boosting customer satisfaction.
Enbi's collaboration with an ATM manufacturer to enhance roller longevity and reduce maintenance
Partnering with a top ATM manufacturer, Enbi delivered high-performance rollers with advanced coatings—cutting maintenance needs, extending service life, and keeping machines reliably running.
Inertia friction welding case study
By switching to Enbi’s inertia friction welding, a leading OEM reduced material waste by up to 70%—cutting costs, saving time, and streamlining roller production.